Schrittmotor: unipolar/bipolar, 200 Schritte/Umdrehung, 57 x 56 mm, 3,6 V, 2 A/Phase hub-sensoren 5 ms pulse width)

5 ms pulse width)

Can also be configured as a FIFO interrupt

allowing you to add your own power buttons and charge ports

can be reduced to 10 µA to 20 µA per volt on VIN by disabling the board

This regulator is available with a fixed 5 V

Schrittmotor: unipolar/bipolar, 200 Schritte/Umdrehung, 57 x 56 mm, 3,6 V, 2 A/Phase hub-sensoren 5 ms pulse width)This high torque hybrid stepper motor has a step angle of 1. 8 (200 steps revolution). Each phase draws 2 A at 3. 6 V, providing a holding torque of 9 kg cm (125 oz in). The motor features six color coded wires with bare leads, allowing it to be driven by both unipolar and bipolar stepper motor drivers. When used with a unipolar driver, all six wires are used. When used with a bipolar driver, the yellow and white wires in the center can remain