ET1C64I39A by RuB Inc. | Standard Actuation Kit | S64(39)LT Low Torque Ball Valve | with ET 24 VAC Electric Actuator | Size 2" | Brass dixon-boss-ground-joint-male-spud L08 Plastic Bowl With Guard

L08 Plastic Bowl With Guard And Manual Drain GRP-95-133 L16 Metal Bowl With Sight Glass And Manual Drain GRP-95-019 L16 Plastic Bowl With Guard And Manual Drain LRP-96-937 L16 Plastic Bowl With No Drain GRP-96-636 L18 Metal Bowl With Sight Glass

3" 05100CSSS 54305100 1/2" 1

791" 470 470R 1-13/16" 1

Manual Drain B72G-2AG B72G-2MG B72G-2AG-MB B72G-2MG-MB 1/4" 80 SCFM - - B72G-3AG-MB B72G-3MG-MB 3/8" 80 SCFM

W-series couplings are not recommended for continuous hydraulic impulse applications at rated pressures

ET1C64I39A by RuB Inc. | Standard Actuation Kit | S64(39)LT Low Torque Ball Valve | with ET 24 VAC Electric Actuator | Size 2" | Brass dixon-boss-ground-joint-male-spud L08 Plastic Bowl With GuardAssumptions: 1. ET Electric Actuators Torque ratings: ET 1 = 150 in lb., ET 2 = 300 in lb., CP = 44 in lb. 2. Media in valve other than slurry liquids with abrasive material. 3. All RuB brass and SS valves with electric actuator assemblies are direct mount (no bridging, bracketing or adaptors) 4. ET actuators standard is 120 VAC. CP actuators are either 110 VAC or 24 VAC. 5. S64(39) and S64(LT) ball valves equipped with SS Trim. S31 and S74 brass ball