Diffuse Reflective Sensor - Infrared, Short Range (100 mm max. Sensing Distance) for Part Ejection Wintriss Repair Parts NOTE: When replacing a Balluff

NOTE: When replacing a Balluff Linear sensor

Load short-circuit protection Ambient temperature range Operation and storage: -25 to 60 degrees C (with no icing or condensation) Ambient humidity range Operation and storage: 35% to 95%  Temperature influence - 15% to +25% max

we've included some sensors and accessories that can facilitate getting the required signals from various machines

The End of Material sensor is designed for metal stamping applications

It can be retrofitted into a DSI-2 that was not equipped with this option from the factory

Diffuse Reflective Sensor - Infrared, Short Range (100 mm max. Sensing Distance) for Part Ejection Wintriss Repair Parts NOTE: When replacing a BalluffThis 100 millimeter range infrared Diffuse Reflective Photosensor is a commonly used sensor for detecting part ejection, when the sensor can be installed close to the part's ejection path. The sensor uses infrared (as opposed to visible) light, making it ideal for use in oily environments such as stamping dies. Its a reflective sensor the emitter and receiver are in the same housing, aimed in the same direction. The emitter sends out a wide cone