KM42 by Dixon Valve | King Hose Mender/Splicer | For Two Clamps | 1/2" Hose ID x 1/2" Hose ID | Steel Male SAE 45 Degree Flare 7 bar) and 40°F to

7 bar) and 40°F to 125°F (4

1 lbs Black 9004 C206C9-P900 201/301 Stainless Steel 3/4" 0

Acrylic Lens

44" 1" 13/16" FC7216-1212S FC6216-1212S FC3596-12S 1-1/16-14 -12 2

Gradient GLSSC100 0-100 PSI 20 2 GLSSC160 0-160 PSI 20 2 GLSSC200 0-200 PSI 50 5

KM42 by Dixon Valve | King Hose Mender/Splicer | For Two Clamps | 1/2" Hose ID x 1/2" Hose ID | Steel Male SAE 45 Degree Flare 7 bar) and 40°F toSafety Notes: Menders are not for compressible products such as air, nitrogen or steam. The working pressure may vary with the construction of the hose, the type of clamping system used and the application. In accordance with the R. M. A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or coupling movement. For