B30 by Dixon Valve | Boss® Clamp | 4-Bolt Type | 2-Gripping Fingers | 2" Hose ID | Hose OD: from 3-6/64" to 3-28/64" | Zinc Plated Iron JDSTYLE_123079 (27mm) 10FFP37BS - 3/8" 10mm

(27mm) 10FFP37BS - 3/8" 10mm 8

(Required) O-Ring Options Neoprene Green HNBR FJ3111-01-0808S M20 x 1

29 lbs/ft FC510-08 12 12

1mm 150 bar 2175 psi 29 bar 421 psi 375 lpm 99 gpm 91

(Required) FJ3059-0404S* 7/16-20 -04 1

B30 by Dixon Valve | Boss® Clamp | 4-Bolt Type | 2-Gripping Fingers | 2" Hose ID | Hose OD: from 3-6/64" to 3-28/64" | Zinc Plated Iron JDSTYLE_123079 (27mm) 10FFP37BS - 3/8" 10mmFeatures: 4 Bolt type clamp. 2 Gripping fingers. 2 Clamp sections. Use: The correct size Boss Clamp must be used. Bolts in Boss Clamps are designed to bend as they are tightened. This allows the clamp to conform to the hose outside diameter. Always tighten bolts to their specified torque value. Periodic re tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses. Boss Clamps are for single use only! Once removed they